Louver Dampers; Servomotors; Duct Connections - Wolf CFL-WRG Installation And Maintenance Instructions Manual

Louver dampers
CFL 10 / 15 / 22 / 32

Servomotors

CFL 10 / 15 / 22 / 32
Mounting bracket
Duct connections (on site)
12
7. Installation / siting
Always fit the louver dampers as shown in the illustration.
Secure servomotors with the supplied mounting bracket, as shown in the
illustration.
For model size CFL-32, rivet the mounting bracket to the damper.
The connectors of the unit are rectangular. Round ducts can be connected directly
to the connectors using an adaptor module from square to round (accessories).
Insulate the ducts, including external dampers, flexible connections and insulating
frames, in accordance with applicable regulations and industry standards.
3065065_201704