Installation / Siting; Installation Location - Wolf CFL-WRG Installation And Maintenance Instructions Manual

CFL-WRG installation location
3065065_201704
7. Installation / siting
The CFL-WRG is designed as an indoor unit and intended solely for ceiling
installation.
The ceiling where the unit will be mounted must be level and sufficiently load
bearing (min. 500 kg/m²).
Only install the unit with the standard suspension brackets supplied, as shown
in the illustration.
For the CFL-32, we recommend using the drilled hole in the middle of the
suspension bracket.
The lifting lugs fitted to the CFL-32 as standard are intended for lifting and
turning the unit. Never use them for mounting the unit on the ceiling. After use,
the lifting lugs can be removed and the drilled holes sealed with the supplied
blanking plugs.
Never drill holes or insert screws in the ceiling panels, as this may damage the
Please
electric cables under the panels.
note
The installation location must meet the requirements of VDI 2050.
Provide sufficient space below the unit for maintenance work.
Site the unit in a room that is free from the risk of frost.
Provide a drain connection for discharging any condensate that may be generated.
Suspension bracket for
Dimensioning for
CFL 10 / 15 / 22 / 32
CFL 10 / 15 / 22 / 32
11