Primary Display; Password Check - MSI MS-5156 Manual

Floppy Access Control
This option sets the Floppy to Read-only or Normal(Full Access).
HDD Access Control
This option sets the HDD to Read-only or Normal(Full Access).
During Read-only, if you try to write on the HDD the system will halt.
PS/2 ® Mouse Support
When this option is set to Enabled, AMI
®
present of a PS/2
are Enabled and Disabled. The Optimal and Fail-Safe default settings are
Enabled.
System Keyboard (leave on the default setting of Absent)

Primary Display

This option configures the primary display subsytem in the
computer. The settings are Mono(monochrome), 40CGA, 80CGA or VGA/
EGA. The optimal and Fail-Safe default settings are VGA/EGA.

Password Check

This option specifies the type of AMI
that is implemented. The Optimal and Fail-Safe default settings are Setup.
®
Boot to OS/2
Set this option to Enabled only if your using an OS/2® and the
memory size is 264MB.
Internal Cache/External Cache
This option Enabled or Disabled the Internal and the External
Cache.
mouse and reserved an IRQ for the mouse. The settings
4-7
®
®
BIOS will autodetect the
®
BIOS password protection