Uart 2 Mode; Onboard Parallel Port - MSI MS-5156 Manual

UART 2 MODE

Standard/ASKIR/
IR Function Duplex
Half/Full
RxD , TxD Active
Hi-Hi/Hi-Lo/
Lo-Hi/Lo-Lo

Onboard Parallel Port

Disabled/
(3BCH/IRQ7)/
(278H/IRQ5)/
(378H/IRQ5)
The system's built-in IR (Infrared) is on
the on-board Super I/O chipset and it
shares serial port 2 with UART 2. Only
one option can be selected for serial port
2, either the IR or UART. Selecting the
IR mode will prompt the following
message:
Disable
3BCH/IRQ7
278H/IRQ5
378H/IRQ5
Users can choose between operating
the IR in Half duplex or Full duplex
mode. Half duplex designates one IR as
a receiver and one as a transmitter. Full
duplex mode designates that the two
IRs receive and transmit data together
simultaneously.
The user can choose between the
preceding RxD (Receive Data), TxD
(Transmit Data) activity levels.
There is a built-in parallel port on the
on-board Super I/O chipset that
provides Standard, ECP, and EPP
features. It has the following options:
Line Printer port 0
Line Printer port 2
Line Printer port 1
3-31
®