Assign Irq For Vga - MSI MS-5156 Manual

Assign IRQ for VGA

Lets the user choose which IRQ to assign for VGA card.
Used MEM base addr
Lets the user choose the Legacy ISA addr. The settings are NA#,
C800, CC00, D000, D400, D800 OR DC00.
Used MEM Length
Choose 8K, 16K, 32K, or 64K MEM length for the MEM used by
the Legacy ISA address.
This Main Menu item loads the default system values. If the CMOS
is corrupted the defaults are loaded automatically. Choose this item and the
following message appears:
To use the Setup defaults, change the prompt to "Y" and press < Enter >
Note: The Setup defaults can be customized to increase performance.
However the BIOS defaults can always be used as a back up if there
is some problem with the mainboard operation.
" Load Setup Defaults (Y / N) ? N "
3-27
®