Sony DSR-1/1P Operating Instructions Manual page 25

3
Attach the cover upside down.
Make sure that the match mark
lines up with the PRO76P
DIGITAL indication.
Using the DXC-637/537/537A/327A/327B series camera
Mounting on the camera
1
If necessary, replace the PRO
50-pin connector with the PRO
76-pin DIGITAL connector.
For details, see "Using the DXC-
D30/D30P/D35/D35P" (on
previous page).
Replace the PRO 76-pin DIGITAL connector with the PRO 50-pin
connector. Press the left side of the PRO 76-pin DIGITAL connector until
the PRO 50-pin connector appears. Make sure that the match mark lines up
with the PRO50P indication.
This section describes the procedure for mounting the DSR-1/1P on a
DXC-D30/D30P/D35/D35P. Use the same procedure for mounting on a
DXC-637 series camera. (Replace the PRO 76-pin DIGITAL connector
with the PRO 50-pin connector.)
When using the camcorder grip
When configuring a camcorder with the camera, a camcorder grip (not
supplied) can be attached instead of the camera grip.
For instructions on attaching the grip, see the operating instructions for the
camera.
PRO 76-pin DIGITAL connector
Match mark
PRO76P
DIGITAL
Chapter 2 Fitting and Connecting Related Equipment
(Continued)
25