Intelligent Picture Control; G-Code Extend; Auto Power Off; Screen Message - Samsung DVD-V70 Instruction Manual

VCR

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
Language : English
preferences.
Install
User Set
1

Auto Power Off

: Off
GB
Screen Messages : On
2
3
Australia Model
4
User Set
5
Colour System : Auto
IPC : On
On

G-Code Extend

: Off
6
Off
7
8
Newzealand Model
User Set
Colour System : Auto
NICAM : On
9
On
IPC : On
Off
G-Code Extend : Off
VCR
Intelligent Picture Control ( Remote Control )
1
OK
2
1
3
4
5
28
During playback, press the MENU button on the remote control.
Result: The Setup menu is displayed.
Press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding , buttons to select the
❷
User Set option.
Press the OK or ❿ buttons to select this option.
Result: The User Set menu is displayed.
Press the corresponding or buttons, until the IPC option is
❷
selected.
Press the OK or ❿ buttons to select the IPC (intelligent picture
control) option.
When intelligent picture control mode is ON , the sharpness
of the image is adjusted automatically.
To adjust the sharpness manually, press the button to turn the
❷
IPC mode OFF .
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
On completion, press the RETURN button again.
During playback, press the IPC button.
Result: The PICTURE menu is displayed.
Press the button to turn the IPC (Intelligent Picture Control)
❷
option and .
ON OFF
When Intelligent Picture Control mode is ON , the sharpness
of the image is adjusted automatically.
To adjust the sharpness manually, select Intelligent Picture Control
mode .
OFF
The horizontal picture adjusting appears.
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
menu disappears automatically.
PICTURE
On completion, press the IPC button again.
G-CODE Extend (DVD-V80/DVD-V85 Only)
To prevent delays or over-runs the VCR has a function called G-
CODE EXTEND allowing you to extend the recording time by up to
60 minutes.
1 After pressing the MENU, press the OK or ❿ .
2
Press the corresponding , buttons to select the User Set
❷
option.
3 Press the OK or ❿ buttons to select this option.
Result: The User Set menu is displayed.
4 Press the corresponding or buttons, until the
❷
G-Code Extend option is selected.
5 Press the OK or ❿ buttons to set the
G-Code Extend
increments of 10 minutes.
6 To turn off, press OK or ❿ buttons repeatedly until
Off shows.
Auto Power Off
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding or buttons, until the Auto Power
❷
option is selected.
Off
3 Press the OK or ❿ buttons, until you select the time of Auto Power
Off interval.
Off 1Hour 2Hour 3Hour
4 On completion, press RETURN twice to exit the menu.
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On GB
Australia Model
User Set
Colour System : Auto
time by Off
IPC : On
10
G-Code Extend : Off
20
30
40
50
60
Newzealand Model
User Set
Colour System : Auto
NICAM : On
Off
IPC : On
10
G-Code Extend : Off
20
30
40
50
60
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Language : English
Install
User Set
Off
Auto Power Off : Off
1Hour
Screen Messages : On
2Hour
3Hour
29