Selecting The Colour Mode; Nicam (Newzealand Model Only) - Samsung DVD-V70 Instruction Manual

VCR

Selecting the Colour Mode

Language : English
Before recording or playing back a cassette, you can select the
Install
required system standard.
User Set
Auto Power Off : Off
Screen Messages : On
GB
DVD-V80/ DVD-V85
Australia Model
User Set
Auto 1
Colour System : Auto
PAL
IPC : On
MESECAM
G-Code Extend : Off
B/W
2
3
4
Newzealand Model
User Set
5
Auto
Colour System : Auto
PAL
NICAM : On
MESECAM
B/W
IPC : On
G-Code Extend : Off
6
DVD-70
Australia Model
User Set
Colour System : Auto
IPC : On
Newzealand Model
User Set
Colour System : Auto
NICAM : On
IPC : On
26
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding , buttons to select the
❷
User Set option.
Press the OK or ❿ to select this option.
Result: The User Set menu is displayed.
Press the corresponding or buttons, until the Colour
❷
System option is selected.
Press the OK or ❿ button to select Auto PAL MESECAM
B/W .
B/W Black and White
On completion, press RETURN three time to exit the menu.

NICAM (Newzealand Model only)

NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 40.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , buttons to select the
❷
User Set option.
3 Press the OK or ❿ to select this option.
Result: The menu is displayed.
User Set
4
Press the corresponding or buttons, until the NICAM
❷
s selected.
5 To... Press OK or ❿, until...
Mono mode Off is displayed.
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode On is displayed.
On: Normally set at this position.
6 On completion, press RETURN three times to exit the menu.
VCR
Language : English
Install
GB
User Set
Auto Power Off : Off
Screen Messages : On
User Set
Colour System : Auto
On
NICAM : On
Off
IPC : On
option G-Code Extend : Off
27