Freestyle Libre User Manual page 50

Display What It May Mean
New Sensor You scanned a new
Found Sensor before your
previous Sensor
ended .
Scan Error The Reader
was unable to
communicate with
the Sensor .
Sensor Error The System is
unable to provide a
glucose reading .
91
ART38553-101_rev-A_manual.indd 91-92
What To Do
Your Reader can only be used
with one Sensor at a time . If
you start a new Sensor, you will
no longer be able to scan your
old Sensor . If you would like to
begin using the new Sensor,
select "Yes" .
Try scanning again .
Note: You may need to move
away from potential sources of
electromagnetic interference .
Scan again in 10 minutes .
Display What It May Mean
Glucose Your Sensor is too Move to a location where the
Reading hot or too cold . temperature is appropriate and
Unavailable scan again in a few minutes .
Sensor The Sensor was A Sensor can only be scanned
Already in started by another by the Reader that started it .
Use Reader . Scan the Sensor again with the
Reader that started it . Or, apply
and start a new Sensor .
Check Sensor The Sensor tip may Try to start your Sensor again . If
not be under your Reader displays "Check Sensor"
skin . again, your Sensor was not
applied properly . Apply and
start a new Sensor .
Replace The System has Apply and start a new Sensor .
Sensor detected a problem
with your Sensor .
What To Do
92
2/1/18 2:13 PM