Using Your Sensor
CAUTIONS:
•
The Sensor Pack and Sensor Applicator are packaged as a
set (separately from the Reader) and have the same Sensor
code . Check that the Sensor codes match
before using your Sensor Pack and Sensor
Applicator . Do not use Sensor Packs and
Sensor Applicators with different Sensor
codes together as this will result in
incorrect glucose readings .
•
Intense exercise may cause your Sensor to loosen due to
sweat or movement of the Sensor . Remove and replace
your Sensor if it starts to loosen and follow the instructions
to select an appropriate application site .
21
ART38553-101_rev-A_manual.indd 21-22
Applying Your Sensor
Step
1
FreeStyle Libre
Sensor Pack
CODE
XXX
XXXXXXXXX
YYYY-MM-DD
2
Action
Apply Sensors only on the back of your upper
arm . If placed in other areas, the Sensor may
not function properly and could give inaccurate
readings . The application of the Sensor is not
approved for other sites . Avoid areas with scars,
moles, stretch marks, or lumps .
Select an area of skin that generally stays flat
during your normal daily activities (no bending
or folding) . Choose a site that is at least 1 inch
(2 .5 cm) away from an insulin injection site . To
prevent discomfort or skin irritation, you should
select a different site other than the one most
recently used .
Clean application site with an alcohol wipe and
allow site to dry before proceeding . This helps
the Sensor stay attached to your body .
Note: The area MUST be clean and dry, or the
Sensor may not stick to the site .
22
2/1/18 2:13 PM