Cisco IR829 Hardware Installation Manual page 33

Product Overview
NOTE: A custom ceiling mount bracket is required for the 2-in-1 antenna if installed in a ceiling mount
configuration (NOT SUPPLIED BY CISCO)
Extension Cable
No extension cables are required if the IR829 is located within ~1.0ft of 5-in-1 antenna, and ~2.0ft of WiFi
2-in-1 antenna.
If these conditions are not met, this deployment requires the following extension cables:
Cellular extension cables (2 ports)
Qty 2X LMR-400-DB TNC(m)-R/A - TNC(f), 5ft
• 4G-CAB-LMR400-5
— OR
Qty 2X LMR-400-DB TNC(m)-R/A - TNC(f), 10ft
• G-CAB-LMR400-10
— OR
Qty 2X LMR-400-LLPL plenum / indoor only TNC(m)-R/A - TNC(f), 20ft
• 4G-CAB-ULL-20
WiFi 2.4 GHz / 5GHz extension cables (4 ports, can mix and match lengths per installation requirements if
needed) Qty 4x LMR-400-DB RPTNC(plug) - STR RPTNC(jack) - STR, 5ft
• AIR-CAB005LL-R
— OR
Qty 4x LMR-400-DB RPTNC(plug)-R/A RPTNC(jack)-STR, 10ft
• CAB-L400-10-R
— AND
GPS port - No extension cable required, 3-in-1 antenna comes with integrated active GPS antenna with 17ft
cable.
Antenna
Quinta 5 element 5-in-1 transportation antenna, black radome color, 2x 4G cellular, 2x dual band WiFi, 1xGPS
• ANT-5-4G2WL2G1-O
Has the following integrated cables:
• qty 2 x cellular, LMR-195, 2ft long, TNC(m)
• qty 2 x WiFi, 2ft long, LMR-195 RPTNC (plug)
• qty 1 x GPS, RG-174, 17ft long, SMA(m)
— AND
WiFi 2-in-1 2 element 2 in 1 transportation antenna, black radome color, 2x dual band WiFi
• ANT-2-WLAN-D-O
Has the following integrated cables:
• qty 2 x WiFi, 3ft long, LMR-240 RPTNC (plug)
Cisco IR829 Industrial Integrated Services Router Hardware Installation Guide
Extension Cable
31