Smart Plug Features; Home Network App Features - Panasonic KX-HNH100C Operating Instructions Manual

5
MOFFN

Smart plug features

Smart plugs (KX-HNA101) allow you to use
the handset to turn electric devices on and off.
Smart plugs also feature an overcurrent
sensor that automatically shuts off the electric
device if an overcurrent is detected.
Turning smart plug on and off
There are 3 ways to turn smart plugs on and
off.
– All smart plugs can be turned on or off at
once.
– All smart plugs in a selected area can be
turned on or off at once.
– Individual smart plugs can be turned on or
off.
Turning multiple plugs on or off
1
MMENUN#802
2
To turn all smart plugs on or off:
MbN: "All locations" a MSELECTN
To turn all smart plugs in a selected
area on or off:
MbN: Select the desired area. a
MSELECTN
3
MbN: Select "All Smart Plugs On" or
"All Smart Plugs Off". a
MSELECTN
4
MOFFN
Note:
R The status of smart plugs may fail to
change. In this case, an error message
indicating the number of the smart plugs
that have not changed is displayed. To
confirm the status, see "Displaying smart
plug status", page 41.
Turning an individual smart plug on or off
1
MMENUN#802
2
MbN: Select the desired area. a
MSELECTN
3
MbN: "Smart Plug status" a
MSELECTN
For assistance, visit www.panasonic.ca/english/support
HNH100C_(en_en)_0130_ver.202.pdf
Home Network System Integration
4
MbN: Select the desired smart plug.
5
Press MONN or MOFFN (Soft key).
6
MOFFN
Displaying smart plug status
1
MMENUN#802
2
MbN: Select the desired area. a
MSELECTN
3
MbN: "Smart Plug status" a
MSELECTN
4
MbN: Select the desired smart plug.
5
MOFFN

Home Network app features

Some of the features that are available when
using the Home Network app are listed below.
For more information, refer to the User's
Guide (page 42).
– Phone features
Make and receive calls, listen to answering
system messages, check call logs, etc.
– Camera monitoring
Watch live images from your cameras,
even when away from home.
– Alarm system features
Receive notifications when the alarm
system is triggered.
– Home control
Configure the system to record camera
images, turn on smart plugs, or call a
preprogrammed phone number when a
sensor is triggered.
Downloading the Home Network
app
Download information is available at the web
page listed below.
41
41
2017/01/30 16:12:24