Handset Locator - Panasonic KX-HNH100C Operating Instructions Manual

Making/Answering Calls
Note:
R Depending on the environment where this
handset is being used, this feature may not
be effective.
R This feature is not available using the
speakerphone.
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1
Press MMENUN while talking.
2
MbN: "Equalizer" a MSELECTN
3
MbN: Select the desired setting. a MOKN
Note:
R Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
R When both the "Equalizer" setting and
noise reduction are activated,
on the display.
Call share
You can join an existing outside call.
To join the conversation, press M
the other unit is on an outside call.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn
privacy mode on (page 27).
Transferring calls, conference
calls
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
1
During an outside call, press MMENUN.
For assistance, visit www.panasonic.ca/english/support
18
HNH100C_(en_en)_0130_ver.202.pdf
2
MbN: "Intercom" a MSELECTN
3
When 3 or more handsets are
registered:
MbN: Select the desired unit. a MSELECTN
When only 2 handsets are registered:
Continue to the next step.
4
Wait for the paged party to answer.
R If the paged party does not answer,
5
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: "Conf." a MSELECTN
R To leave the conference, press MOFFN.
R To put the outside call on hold:
R To cancel the conference: MMENUN a
is shown
Note:
R You can also select your mobile device in
this feature using a handset, if your mobile
device is registered to the hub. For more
N when
information, refer to the User's Guide
(page 42).

Handset locator

You can locate a misplaced handset by
paging it.
1
Hub: Press M
LOCATORN.
R All registered handsets beep for 1
2
To stop paging:
Hub:
Press M
Handset:
Press MOFFN.
18
press MBACKN to return to the outside
call.
The other 2 parties can continue the
conversation.
MMENUN a MbN: "Hold" a
MSELECTN
To resume the conference: MMENUN
a MbN: "Conf." a MSELECTN
MbN: "Stop conference" a
MSELECTN
You can continue the conversation
with the outside caller.
A HANDSET/
minute.
A HANDSET/LOCATORN.
2017/01/30 16:12:23