Other Programming - Panasonic KX-HNH100C Operating Instructions Manual

Home network system digital cordless handset
Table of Contents

Advertisement

Programming
Storing a range of numbers
1
MMENUN#217
2
MbN: "Block range of numbers" a
MSELECTN
3
MMENUN a MbN: "Add" a MSELECTN
4
Enter the desired number (2-8 digits).
R To erase a digit, press MCLEARN.
5
MSAVEN a MOFFN
Blocking incoming calls that
have no phone number
You can reject calls when no phone number is
provided, such as private callers or out of area
calls.
1
MMENUN#240
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Setting the first ring for the call
block list
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to "Off". The default setting is "On".
1
MMENUN#173
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Viewing/editing/erasing call
block numbers
1
MMENUN#217
2
MbN: "Block a single number" or
"Block range of numbers" a
MSELECTN
3
MbN: Select the desired entry.
R To exit, press MOFFN.
4
To edit a number:
MEDITN a Edit the number. a MSAVEN
a MOFFN
To erase a number:
MERASEN a MbN: "Yes" a MSELECTN
a MOFFN
For assistance, visit www.panasonic.ca/english/support
30
HNH100C_(en_en)_0130_ver.202.pdf
Note:
R When editing, press the desired dial key to
add, MCLEARN to erase.
Erasing all call block numbers
1
MMENUN#217
2
MbN: "Block a single number" or
"Block range of numbers" a
MSELECTN
3
MMENUN a MbN: "Erase all" a
MSELECTN
4
MbN: "Yes" a MSELECTN
5
MbN: "Yes" a MSELECTN a MOFFN

Other programming

Changing the handset name
You can customize the name of your handset.
This can help you easily identify handsets
when making intercom calls, transferring calls
to other handsets, etc. You can select whether
or not the handset name is displayed in
standby mode. The default setting is "No". If
you select "Yes" without entering any handset
name, "Handset 1" to "Handset 6" is
displayed.
1
MMENUN#104
2
Enter the desired name (10 characters
max.). a MSAVEN
3
MbN: Select the desired setting. a
MSELECTN 2 times a MOFFN
Registering a handset to the hub
If for some reason the handset is not
registered to the hub (for example,
displayed even when the handset is near the
hub), re-register the handset.
1
Handset:
MMENUN#130
30
is
2017/01/30
16:12:24

Advertisement

Table of Contents
loading

Table of Contents