Cleaning The Paper Guide - Kodak Apex 7015 User Manual

Cleaning the Paper Guide

1. Make sure the power switch is turned off ( ).
2. Carefully open the top cover.
CAUTION:
The thermal head becomes extremely hot during normal
operation. Do not touch it.
There are sharp cutter blades inside the printer. Follow
instructions carefully to avoid touching any areas that may
be hazardous.
3. Remove the paper guide by pulling up on the two black knobs.
4. Remove an alcohol pad from its packaging. Wipe the surfaces
of the guide with the pad.
5. Reinstall the paper guide. Press down on each knob until each
side of the paper guide clicks into place.
6. Allow the alcohol to dry completely (about five minutes)
before you resume printing.
7. Close the top cover.
Maintaining the Printer
3-3