Electrostatic Discharge (Esd); Other Hazards - Nvidia DGX-2 SYSTEM User Manual

Using DGX-2 System in KVM Mode
B.9. Electrostatic Discharge (ESD)
Caution: ESD can damage drives, boards, and other parts. We recommend that you
perform all procedures at an ESD workstation. If one is not available, provide some ESD
protection by wearing an antistatic wrist strap attached to chassis ground -- any
unpainted metal surface -- on your server when handling parts.
Always handle boards carefully. They can be extremely sensitive to ESO. Hold boards
only by their edges. After removing a board from its protective wrapper or from the
server, place the board component side up on a grounded, static free surface. Use a
conductive foam pad if available but not the board wrapper. Do not slide board over
any surface.
B.10.

Other Hazards

CALIFORNIA DEPARTMENT OF TOXIC SUBSTANCES CONTROL:
Perchlorate Material – special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Perchlorate Material: Lithium battery (CR2032) contains perchlorate. Please follow
instructions for disposal.
NICKEL
NVIDIA Bezel. The bezel's decorative metal foam contains some nickel. The metal
foam is not intended for direct and prolonged skin contact. Please use the handles to
remove, attach or carry the bezel. While nickel exposure is unlikely to be a problem, you
should be aware of the possibility in case you're susceptible to nickel-related reactions.
Battery Replacement
Caution: There is the danger of explosion if the battery is incorrectly replaced. When
replacing the battery, use only the battery recommended by the equipment
manufacturer.
DGX-2 System User Guide
95