System Access Warnings - Nvidia DGX-2 SYSTEM User Manual

B.7. System Access Warnings
Caution: To avoid personal injury or property damage, the following safety instructions
apply whenever accessing the inside of the product:
Turn off all peripheral devices connected to this product.

Turn off the system by pressing the power button to off.

Disconnect the AC power by unplugging all AC power cords from the system or wall

outlet.
Disconnect all cables

system.
Retain all screws or other fasteners when removing access cover(s). Upon completion

of accessing inside the product, refasten access cover with original screws or
fasteners.
Do not access the inside of the power supply. There are no serviceable parts in the

power supply.
Return to manufacturer for servicing.

Power down the server and disconnect all power cords before adding or replacing

any non hot-plug component.
When replacing a hot-plug power supply, unplug the power cord to the power

supply being replaced before removing the power supply from the server.
Caution: If the server has been
may be hot.
Unless you are adding or removing a hot-plug component, allow the system to cool
before opening the covers. To avoid the possibility of coming into contact with hot
component(s) during a hot-plug installation, be careful when removing or installing the
hot-plug component(s).
Caution: To avoid injury do not contact moving fan blades. Your system is supplied
with a guard over the fan, do not operate the system without the fan guard in place.
.
DGX-2 System User Guide
and telecommunication lines that
running, any installed
Using DGX-2 System in KVM Mode
are connected to the
processor(s) and heat sink(s)
93