Scroll to the specific item and press Enter.
a)
Enter the appropriate information at the pop-up, then press Enter.
b)
When finished making all your changes, press F10 to save & exit
6.
You can now access the BMC over the network.
5.6.3
Configuring a BMC Static IP Address Using the
BMC Dashboard
These instructions describe IPv4 addressing, but IPv6 addressing to the BMC can be
configured if needed through the corresponding IPv6 fields.
Log into the BMC, then click Settings->Network Settings->Network IP Settings.
1.
Clear the Enable IPv4 DHCP check box, then enter the appropriate values for
2.
the IPv4 Address, IPv4 Subnet, and IPv4 Gateway fields .
DGX-2 System User Guide
Network Configuration
35