Signs Of A Bad Otdr Connector - Fluke OF-500 OptiFiber User Manual

OF-500 OptiFiber Certifying OTDR
Users Manual

Signs of a Bad OTDR Connector

Figure 40 shows traces from OTDRs with good and poor
OTDR port connections. The tester's OTDR Port Connection
100
Figure 40. Traces Showing Good and Bad OTDR Connectors
Quality gauge (page 30) lets you know if the connection is
poor. Use a fiber microscope to inspect the connector for dirt
and damage. If the connector is damaged, contact Fluke
Networks for service information.
ajt34f.eps