Dell PowerEdgeFC430 Owner's Manual page 64

c Remove the PCIe mezzanine card bridge and keep it aside for future use.
CAUTION: To prevent damage to the PCIe mezzanine card, you must hold the card only by its edges.
Figure 16. Removing a PCIe mezzanine card
1 screw hole on SSD cage (2)
3 PCIe mezzaninebridge card
5 PCIe mezzanine card
Next steps
1 Install the PCIe mezzanine card.
2 Install the SSD cage.
3 If applicable, reconnect the disconnected storagedevices.
4 If applicable, reconnect the disconnected USB devices.
5 Followthe procedure listed inthe After working inside your systemsection.
Related links
Safety instructions
Before working inside your system
Removing the SSD cage
Installing the PCIe mezzanine card
Installing the SSD cage
After working inside your system
64 Installing and removing sled components
2 externalstorageconnector(2)
4 Screw (2)
6 SSD cage