Dell PowerEdgeFC430 Owner's Manual page 35

Option Description
System Memory
Specifies the memory size in the system.
Size
System Memory
Specifies the type of memory installed in the system.
Type
System Memory
Specifies the system memory speed.
Speed
System Memory
Specifies the system memory voltage.
Voltage
Video Memory
Specifies the amount of video memory.
Specifies whether the system memory tests are run during system boot. Options are Enabled and Disabled. This
System Memory
Testing option is set to Disabledbydefault.
Memory Operating Specifies the memory operating mode. The options available are Optimizer Mode, Advanced ECC Mode, Mirror
Mode Mode, Spare Mode, Spare with Advanced ECC Mode, Dell Fault Resilient Mode and Dell NUMA Fault Resilient
Mode.This option is set to Optimizer Modebydefault.
Node Interleaving
Specifies if Non-Uniform Memory architecture (NUMA) is supported. If this field is set to Enabled, memory
interleaving is supported if asymmetric memory configuration is installed. If the field is set to Disabled, the system
supports NUMA(asymmetric) memoryconfigurations.Thisoptionissetto Disabledbydefault.
Snoop Mode Specifies the Snoop Mode options. The Snoop Mode options available are Home Snoop, Early Snoop, and Cluster
on Die. This option is set to Early Snoop bydefault. This field is available only whenthe Node Interleaving is set
to Disabled.
Related links
Memory Settings
Viewing Memory Settings
Processor Settings
You can use the Processor Settingsscreen to viewthe processor settings, and perform specific functionssuch asenablingvirtualization
technology, hardware prefetcher, and logical processor idling.
Related links
Processor Settings details
System BIOS
Viewing Processor Settings
Viewing Processor Settings
To view the Processor Settings screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
yoursystemandtryagain.
Onthe System Setup Main Menu screen, click System BIOS.
3
NOTE: The Memory Operating Modeoptioncanhavedifferentdefaultandavailableoptions basedon
thememoryconfigurationofyour system.
NOTE: The Dell Fault Resilient Mode option establishes an area of memory that is fault resilient. This
modecan beused by anoperating system that supportsthe feature toload critical applications or
enables the operating system kernel to maximize system availability.
Pre-operating system managementapplications 35