Dell PowerEdgeFC430 Owner's Manual page 37

Option Description
Processor Core
Specifies the maximum core frequency of the processor.
Speed
Processor 1
The following settings are displayed for each processor installed in the system:
Option
Family-Model-
Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores
Related links
Processor Settings
Viewing Processor Settings
SATA Settings
You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on your system.
Related links
SATA Settings details
System BIOS
Viewing SATA Settings
Viewing SATASettings
To view the SATA Settings screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
yoursystemandtryagain.
Onthe System Setup Main Menu screen, click System BIOS.
3
On the System BIOS screen, click SATASettings.
4
Related links
SATA Settings
SATA Settings details
SATA Settingsdetails
The SATA Settings screen details are explained as follows:
NOTE: Depending on the number of CPUs, there may be up to four processors listed.
Description
Specifies the family, model, andstepping of the processor as defined by Intel.
Specifies the brand name.
Specifies the total L2 cache.
Specifies the total L3 cache.
Specifies the number of cores per processor.
Pre-operating system managementapplications 37