Dell PowerEdgeFC430 Owner's Manual page 28

Related links
UEFI iSCSI Settings
Network Settings screen details
UEFI iSCSI Settings details
System BIOS
Viewing Network Settings
Viewing UEFI iSCSI Settings
Viewing Network Settings
To view the Network Settings screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
yoursystemandtryagain.
Onthe System Setup Main Menu screen, click System BIOS.
3
Onthe SystemBIOS screen, click NetworkSettings.
4
Related links
Network Settings
Network Settings screen details
Network Settings screen details
The Network Settings screen details are explained as follows:
Option Description
PXE Device n (n = 1
Enablesordisablesthedevice.Whenenabled,aUEFIbootoptioniscreatedforthedevice.
to 4)
PXE Device n
Enables you to control the configuration of the PXE device.
Settings(n= 1to4)
Related links
Network Settings
Viewing Network Settings
UEFI iSCSI Settings
Youcanusethe iSCSISettings screentomodifyiSCSIdevicesettings.TheiSCSISettingsoptionis available onlyintheUEFI bootmode.
BIOS does not control network settings in the BIOS boot mode. For the BIOS boot mode, the option ROM of the network controller
handles the network settings.
Related links
UEFI iSCSI Settings details
Viewing UEFI iSCSI Settings
28 Pre-operating system managementapplications