Dell PowerEdgeFC430 Owner's Manual page 29

Viewing UEFI iSCSI Settings
To view the UEFI iSCSI Settings screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
yoursystemandtryagain.
Onthe System Setup Main Menu screen, click System BIOS.
3
Onthe SystemBIOS screen, click NetworkSettings.
4
Onthe Network Settings screen, click UEFIiSCSISettings.
5
Related links
UEFI iSCSI Settings
UEFI iSCSI Settings details
UEFI iSCSI Settings details
The UEFI ISCSI Settings screen details are explained as follows:
Option Description
ISCSI Initiator Name Specifies the name of the iSCSI initiator (iqn format).
ISCSI Device n (n = EnablesordisablestheiSCSIdevice.Whendisabled,aUEFIbootoptioniscreatedfortheiSCSIdevice
1 to 4)
automatically.
Related links
UEFI iSCSI Settings
Viewing UEFI iSCSI Settings
System Security
You can use the SystemSecurity screen to perform specific functions such as setting the system password, setup password and
disablingthepowerbutton.
Related links
System Security Settings details
Operating withasetup password enabled
System BIOS
Viewing System Security
Creating a system and setup password
Using yoursystempasswordtosecureyoursystem
Deleting or changing system and setup password
Viewing System Security
To view the System Security screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
Pre-operating system managementapplications 29