Operations - Bissell PET HAIR ERASER TURBO Quick Start Manual

Operations

WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
1
Turn vacuum ON by pressing Power Switch on
(I - ON and O - OFF). Press Brush Roll switch to
run the PowerBrush for carpet cleaning (Brush
Roll is on when light on switch is illuminated).
See page 15 to maintain the Brush Roll.
NOTE: The Brush Roll will automatically shut o when vacuum is locked in upright
position. Recline to reactivate.
NOTE: In the unlikely event that hair wrapped around your Brush Roll, run vacuum back
and forth on clean carpet several times to help release any wrapped hair.
NOTE: Turn o the Brush Roll when vacuuming hard or delicate surfaces that may be
caught by the rotating brush. This could include hard wood, tiled fl oors, small area rugs,
or frieze carpets that have long delicate fi bers or threads.
Adjusting the Suction Control
1
6
www.BISSELL.ca
2
Step gently on base and pull
back on handle to recline.
Locate the Suction Control
setting on the vacuum handle.
Adjust Suction Control for plush
carpet or low carpet for easy
multi-surface cleaning.