Toyota Coaster 2015 Owner's Manual page 176

CHASSIS LUBRICATION
Wheel bearings:
Lithium base wheel bearing grease,
NLGI No.2
Ball joints:
Molybdenum−disulfide lithium base chas-
sis grease, NLGI No.2
Upper arm bushings:
Molybdenum−disulfide lithium base chas-
sis grease, NLGI No.2
Center and Idler arm brackets:
Molybdenum−disulfide lithium base chas-
sis grease, NLGI No.2
Spiders of propeller shafts:
Lithium base chassis grease, NLGI No.2
Slide yoke of propeller shafts:
Molybdenum−disulfide lithium base chas-
sis grease, NLGI No.2 or lithium base
chassis grease, NLGI No.2
BRAKES
Minimum pedal clearance when depressed
with the force of 490 N (50 kgf, 110 lbf)
with the engine running, mm (in.):
45 (1.8)
Pedal free play, mm (in.):
1—6 (0.04—0.24)
Parking brake adjustment when pulled with
the force of 245 N (25 kgf, 55 lbf):
6—8 clicks
Fluid type:
SAE J1703 or FMVSS No.116 DOT 3
STEERING
Wheel free play:
Less than 40 mm (1.6 in.)
Power steering fluid type:
Automatic transmission fluid DEXRON
or lll
Tires
Tire size and cold tire inflation pressur-
2
e, kPa (kgf/cm or bar, psi):
Front 7.00R16−12
Rear 7.00R16−12
Wheel nut torque, N·m (kgf·m, ft·lbf):
515 (52.5, 380)
NOTE: For a complete information on
tires (e.g. replacing tires or re-
placing wheels), see "Checking
tire inflation
"Replacing wheels" in Section 7−2.
â
II
550 (5.50, 80)
325 (3.25, 47)
pressure" through
169