Toyota Coaster 2015 Owner's Manual page 118

—Loosening wheel nuts
Loosen
Left−hand thread
Left−side wheels
Right−side wheels
4. Loosen all the wheel nuts.
Always loosen the wheel nuts before rais-
ing the vehicle.
To loosen the nuts, use the large end of
the wheel nut wrench. Turn the left−side
wheel nuts clockwise and the right−side
wheel nuts counterclockwise.
To get maximum leverage, fit the wrench
to the nut so that the handle points to the
front of the vehicle. Grab the wrench near
the end of the handle and pull up on the
handle. Be careful that the wrench does
not slip off the nut.
Do not remove the nuts yet—just unscrew
them about one−half turn.
Loosen
Right−hand
thread
—Positioning the jack
Front Rear
5. Position the jack at the correct jack
point as shown.
Make sure the jack is positioned on a
level and solid place.
111