Toyota Coaster 2015 Owner's Manual page 123

Tapered portion
CAUTION
Be sure to install the wheel nuts with
the tapered end facing inward. Instal-
ling the nuts with the tapered end
facing outward can cause wheel to
break and eventually cause a wheel to
come off while driving, which could
lead to an accident resulting in death
or serious injury.
116
—Lowering your vehicle
Lower
10. Lower the vehicle completely.
Using the small end of the jack handle,
slightly unscrew the pressure release
valve. After removing the jack from under
the vehicle, completely screw in the pres-
sure release valve.
CAUTION
When lowering the vehicle, make sure
all portions of your body and all oth-
er persons around will not be injured
as the vehicle is lowered to the
ground.
1
3
4
5
2
Tighten each nut a little at a time in the
order shown. Repeat the process until all
the nuts are tight.
Use only the wheel nut wrench to tighten
the nuts. Do not use other tools or any
additional leverage other than your hands,
such as a hammer, pipe or your foot.
Make sure the wrench is securely en-
gaged over the nut.