External Pwm; Config_Pwm Register Configuration; 3.12.14 Master Sloper Setting; 3.12.15 Status Register - Texas Instruments LED171596AEVM User Manual

EVM Software
The button "PWM Config" provides a popup to select pwm_input_edge_sel, pwm_input_hysteresis, and
pwm_phase_shift_config bits. The selected values are transferred to EVM when the "Done" button is
clicked.

3.12.14 Master Sloper Setting

The Master Sloper group box provides the interface to control of SLOPER_TARGET (0x1CE) register and
SLPERS_CONFIG (0x1CD) register.

3.12.15 Status Register

The Status group box provides the information of STATUS (0x3) register.
22
Using the LED171596AEVM Evaluation Module
Figure 42. External PWM
Figure 43. CONFIG_PWM Register Configuration
Figure 44. Master Sloper Setting
Copyright © 2017–2018, Texas Instruments Incorporated
SNVU546C – October 2017 – Revised May 2018
Submit Documentation Feedback
www.ti.com