Operating The Patient Table - Siemens MAGNETOM Skyra fit Operator's Manual

Connections
Paper roll holder
MAGNETOM Skyra fit | syngo MR E11
Print No. M6-04401.621.02.02.02

Make sure that no liquids such as contrast medium, blood, or
cleaning agents get into the table connections.
The following connections are located at the foot end of the patient
table:
(1) Headphones
(2) Vacuum cushion
(3) Squeeze bulb
(4) Placeholder [Intended for future use]
The paper roll holder can be mounted at the foot end of the table
below the handle. It includes a holder to reposit the headphones and
can be removed if required. To replace the paper roll (disposable),
you need to detach the headphone holder. If you remove the stick on
the paper roll, you can pull out the right mounting bracket. Then you
can replace the roll and let the bracket again lock into place.
3.4.2

Operating the patient table

The patient table can be controlled via the movement buttons and
the jogwheel on the larger control unit.
Please note that this section only describes the operation of the
patient table. For details on positioning the patient, see:
Manual Coils
MR system components
( Page 54 Control units)
3
Operator
59