Models - Graco EnDure Instruction Manual

Models

Basic Complete
Valve Valve Description
Part No. Part No. (Replaces ...)
244535 244910 Valve, ambient or water
conditioned. Replaces
C27340 hard seat and
918512 soft seat snuff-back,
if application is under 95 C
(200 F).
244961 Valve, 120 Volt E-Heat
Replaces valve 194485.
Any heated PrecisionFlo
before XL (July 2001) if
application is under 95 C
(200 F).
244962 Valve, 230 Volt E-Heat
Replaces 243694 hard seat
and 243696 soft seat snuff-
back valves. Any Therm-O-
Flow Plus (after July 2000)
if application is under 95 C
(200 F).
244907 244908 Valve, 120 Volt E-Heat
Replaces C34068 hard
seat, 918483 soft seat
snuff-back, any
Therm-O-Flow before
Therm-O-Flow Plus (July
2000) if application is 95 C
(200 F) to 204 C (400 F).
244909 Valve, 230 Volt E-Heat
Replaces 243694 hard seat
and 243696 soft seat snuff-
back valves. Any Therm-O-
Flow Plus (after July 2000) if
application is 95 C (200 F)
to 204 C (400 F).
297261 Complete Valve, 240 Volt
E– Heat; Swirl Equipped
244937 244951 Valve, 230 Volt E-Heat
Replaces valve 243695
hard seat with 1/2" npt (m)
outlet. Any Therm-O-Flow
before Therm-O-Flow Plus
(July 2000) if application is
95 C (200 F) to 204 C (400
F).
245184 Valve, 120 Volt E-Heat
Replaces C34079 hard seat
with 1/2" npt (m) outlet. Any
Therm-O-Flow Plus (after
July 2000) if application is
95 C (200 F) to 204 C (400
F).
309376L
Maximum
Fluid Heater Voltage
Temperature
Rating C (F) Pin Connector
95 C (200 F) Nonpowered
ambient or water
circulation for
temperature
conditioning
95 C (200 F) 120 VAC
6 Pin round
95 C (200 F) 230 VAC
8 Pin square
204 C (400 F) 120 VAC
6 Pin round
204 C (400 F) 230 VAC
8 Pin square
204 C (400 F) 240 VAC
8 Pin square
204 C (400 F) 230 VAC
8 Pin square
204 C (400 F) 120 VAC
6 Pin round
Valve Outlet
Wattage Connection
0 5/8–18 male
thread.
Retainer nut
with 1/8 npt(f)
150 5/8-18 male
thread.
Retainer nut
with 1/8 npt(f)
200 5/8-18 male
thread.
Retainer nut
with 1/8 npt(f)
150
5/8-18 male
thread.
Retainer nut
with 1/8 npt(f)
200 5/8-18 male
thread.
Retainer nut
with 1/8 npt(f)
200
5/8-18 male
thread with
swirl adapter
150
1/2 npt (m)
200 1/2 npt (m)
Parts
Page
29
27
23
27
23
23
27
3