Models; Related Manuals - Graco 25C453 Instructions Manual

Models

The Electric Direct Drive Agitator requires power from a variable frequency drive (VFD) to control speed and is not
to be used without one. See manual 3A4793 for a listing of part numbers for related VFD controls, to be ordered
separately.
Table 1 UL Listed Explosion Proof Inverter Duty Motor
Part No. Description
25C453 3" Quick-clamp Flange Mount Agitator Motor
+
25C575 4" Quick-clamp Flange Mount Agitator Motor
+
25C454 7.5" OD Flange Mount Agitator Motor (3" 150# ANSI Flange
+
Mounting Holes)
25C462* Pressure Tank Agitator Assembly (5 Gallon)
25C470* Pressure Tank Agitator Assembly (10 Gallon)
25C471* Pressure Tank Agitator Assembly (15 Gallon)
Table 2 ATEX Listed Explosion Proof Inverter Duty Motor
Part No. Description
25C464 3" Quick-clamp Flange Mount Motor
+
25C576 4" Quick-clamp Flange Mount Motor
+
25C463 7.5" OD Flange Mount Motor (3" 150# ANSI Flange Mounting
+
Holes)
25C465* Pressure Tank Agitator Assembly (5 Gallon)
25C472* Pressure Tank Agitator Assembly (10 Gallon)
25C473* Pressure Tank Agitator Assembly (15 Gallon)
Does not come with shaft or impeller. See
+
diameter part numbers, to be ordered separately.
* These models include a shaft and impeller, but do not include pressure tanks. These models are for the replacement
of existing air motor driven pressure tank agitators. See manual 308369 for corresponding pressure tank part
numbers, to be ordered separately.

Related Manuals

Manual Number
3A4793
308369
Card P/N 4054
Numero: UM-3.1
3A4553D
Shaft and Impeller Size, page 6
Title
VFD (Variable Frequency Drive)
5, 10, and 15 Gallon Pressure Tanks
Leeson Electric Corporation, General Installation and Operating Instructions (for UL
®
Listed motors)
cemp Flameproof Electric Motors, ATEX safety instructions
Motor Hazardous Location
Approvals
Agitator Approvals
for proper shaft length and impeller
Models
3