Siemens SIMATIC ET 200SP Manual page 61

Parameter data record
A.2 Parameter assignment and structure of parameter data record
Header information
The figure below shows the structure of the header information.
Figure A-2
Parameters
The figure below shows the structure of the parameters for channels 0 to 3.
You can activate a parameter by setting the corresponding bit to "1".
* x = 2 + (channel number * 22); channel number = 0 to 3
60
Header information
Analog input module AI 4xRTD/TC 2-/3-/4-wire HF (6ES7134-6JD00-0CA1)
Manual, 09/2018, A5E03573289-AE