Table of Contents
Advertisement
(4) For wiring of the FR-A700 series 22K* or less and the FR-F700 series 30K* or less, route wires between
the control circuit terminal block and front cover. If cables can not be routed between the control circuit
terminal block and front cover (approx 7mm), remove a hook of the front cover and use a space become
available.
For wiring of the FR-A700 series 30K* or more and the FR-F700 series 37K* or more, use the space
on the left side of the control circuit terminal block.
CC-Link
dedicated
cable
FR-A700 series 22K or less
and FR-F700 series 30K or less
* The inverter type of 22K and 30K of FR-A700 series, 30K and 37K of FR-F700 series in each -NA, -EC versions are as follows.
FR-A720-22K
FR-A740-22K
A700
FR-A720-30K
FR-A740-30K
FR-F720-30K
FR-F740-30K
F700
FR-F720-37K
FR-F740-37K
Cut off a hook on the inverter
front cover side surface.
(Cut off so that no portion is left.)
NA
FR-A720-00900-NA
FR-A740-00440-NA
FR-A720-01150-NA
FR-A740-00570-NA
FR-F720-01250-NA
FR-F740-00620-NA
FR-F720-01540-NA
FR-F740-00770-NA
Cut off
with a
nipper,
CC-Link
etc.
dedicated
cable
FR-A700 series 30K or more
and FR-F700 series 37K or more
EC
FR-A740-00620-EC
FR-A740-00770-EC
FR-F740-00620-EC
FR-F740-00770-EC
WIRING
3
Control circuit
terminal block
17
Advertisement
Table of Contents
