Transit Coupling - Invacare Robin User Manual

4.2 Transit coupling
The room to room coupling can be used in the rail system, where there is a requirement to transfer a patient
between two rooms.
The room to room coupling can be used when there is traverse system in both rooms or travers system in one of
the rooms and mono rail in the other room.
A
C
A) To transfer a patient between rooms, place the hoist with load right under the mono system.
See drawing A point 1.
Then move the Robin and tracking so that the two sections of track line up with each other.
See drawing A point 2.
B) Press the button on the wall mounted control box. See drawing b point 3. When the tracking is locked in
place the green light illuminates and the transfer can be carried out. See drawing B point 4 & 5.
C) When the Robin is safely located on the new section of tracking, the button on the control box, can then be
pressed again to unlock the two sections of tracking. See drawing C point 6 & 7.
D) The green light will then go out, to indicate that the two sections of tracking can be safely moved away from
each other. See drawing D point 8 & 9.
It is esssential that during the transfer process you locate the Robin Mover
this will ensure the safe coupling of the tracking sections. If in doubt , or you experience difficulty in coupling the
tracking, contact your Invacare dealer.
B
D
TM
16
as indicated in the above diagrams,