Changing A Flat Tire - Acura Integra 1987 Manual

Changing a Flat Tire

H-
Do not attempt to change a tire unless the car is on
warning
firm, level ground and well out of the flow of traffic.
Park the car on a firm, level surface, apply the parking brake, turn
on the hazard warning switch and put the transmission in gear,
(Park for automatic).
1. Remove the jack, jack handle and lug wrench (in the tool bag)
from the location shown.
NOTE: Turn the connector on the end of the jack counter­
clockwise to loosen it from its mount.
3. Place blocks in front and back of the wheel diagonally opposite
the tire you are changing.
4. Use the
counterclockwise one-half turn. On the LS, first remove the
center cap from the wheel by prying it out with a screwdriver.
90
TOOL BAG
lug wrench to loosen the wheel lug nuts