Acura Integra 1987 Manual page 50

The combined ignition switch/anti-theft lock is located on the
right side of the steering column and has four positions:
• O-LOCK position:
position. To remove the key, push it in at position I, then turn
it to 0 and pull it out. When the key is removed, the steering
column will lock.
^W ARNING
Never turn the ignition switch to the lock position or
remove the key while the car is in motion; the steering wheel can
lock causing a loss of directional control, and an accident could
result.
• l-A C C ESSO R Y position:
is on, but the ignition circuit is off. If the key is difficult to turn
from the 0 to the I position, turn the steering wheel slightly to
relieve pressure on the lock.
• ll-ON position:
• MI-START position:
turned to this position.
To remind you to remove the ignition key when leaving your car,
a beeper will sound if the key is still in the ignition when you open
the driver's door. The beeper system is deactivated when you turn
the ignition to 0 (Lock) and fully remove the key.
The key can be removed or inserted in this
In this position, the accessory circuit
This is the normal running position.
The starter will engage when the key is
Ignition S w itch
4 7