Operations; Key Operations / Indicator Lights - Trane SmartGen HSC940 Owner's Manual

4.1 KEY OPERATIONS
Stop/ Reset
Start
Manual Mode
Auto Mode
Set/Confirm
Up/Increase
Down/Decrease
4.2 INDICATOR LIGHTS
Gens Normal
Indicator
Stop Indicator
Stop
6
Operation
Stop running generator in Auto/Manual mode; Lamp test (press
at least 3 seconds); Reset alarm if alarm occurs; During stopping
process, press this button again to stop generator immediately.
Start genset in Manual/Test mode.
Pressing this key will set the module into Manual mode. Press-
ing and (or ) simultaneously can adjust LCD contrast.
Pressing this key will set the module into AUTO mode.
Pressing this key will view set menu; In parameter setting inter-
face, press this key will shift cursor or confirm setting value.
Scrolls the screen up; Shift the cursor up or increase the set
value in parameter setting menu.
Scrolls the screen down; Shift the cursor down or decrease the
set value in parameter setting menu.
Manual Manual
Indicator
Auto Auto
Indicator
Alarm
Close Gens
Start Set
032-5094-1A-EN