Jackson DELTA 115 Installation, Operation And Service Manual page 40

SERVICE
WASH MOTOR
REPLACEMENT
33
2. Using the 5/16" nutdriver, loosen the clamps on the suction hose.
3. Using the same nutdriver, loosen the disharge hose where it connects to the
tub weldement.
4. Pull the discharge hose out and away from the tub.
5. Remove the motor assembly mounting nuts using the 7/16" combination
wrench.
6. With the nuts removed, grasp the motor assembly and lift up on it to clear the
mounting studs.
SERVICE PROCEDURES
07610-003-62-15-Q