Change Passwords After Configuration - Fortinet FortiNac BFN620 Installation Manual

Change Passwords After Configuration

Configuration files are overwritten whenever you run the Configuration Wizard. It is strongly
recommended, therefore, that you do not make changes outside of the Configuration Wizard.
Making all changes from within the Configuration Wizard prevents you from having custom
configuration files that can be accidentally overwritten.
Running the Configuration Wizard to change passwords after the initial setup also causes all
configuration files to be overwritten if you use the Next button to scroll through all of the pages. If
no manual changes have been made, this does not cause a problem. However, it is
recommended that you go directly to the Change Password window without running the entire
Configuration Wizard, save the passwords and exit the wizard.
See
Configuration Wizard - Passwords on page 12
passwords.
To go directly to the Change Passwords window, type one of the following URLs:
http://<Host Name>:8080/configWizard/PasswordChange.jsp
http://<IP Address>:8080/configWizard/PasswordChange.jsp
Figure 24: Change Passwords Window
Change Passwords After Configuration
for additional information on modifying your
45