Explanation of Symbols in this Guide
Specific symbols are used to define particular operations or to highlight important areas as follows:
Caution
Programming key
Select function
Scroll
Scroll through menus
System Programming
The system may only be programmed from one specific extension, by default this is configured as
extension 20, but the programming position can be moved to any extension.
The System Programming is separated into three main blocks:
System
covers aspects that affect operations across the complete system.
Extension
covers aspects that may be programmed per extension.
Lines
covers aspects which affect the Network connections, Incoming and Outgoing Calls,
and Least-Cost Routing configuration.
6
EncoreCX
Getting Started Guide