Monarch 9460 Service Manual page 37

Error Codes
352 Insufficient memory is available for the downloaded font.
380 Job request is invalid. Must be 0 to 4.
The character immediately following { is invalid.
400
401 Internal software failure.
402 Field separator is not in the expected location.
403 Record separator was not found.
404 Bad token, number, or string is too long.
405 Too many fields exist in the format. You cannot have more than 1000 fields in the format.
409 The printer memory is full. Delete unnecessary formats or graphics from memory. If you are using a
graphic file that is very large, consider using another mapping method (such as run length encoding) to
reduce the required memory.
410 Parity on the printer does not match the parity on the host. Check the parity setting under SETUP
options.
411 Framing error. The printer cannot communicate with the host. Make sure the host is turned on,
communication cables are connected correctly, port settings are correct, and communications are
active. Check the baud rate, word length, and stop bits to make sure they match those at the host. Do
not toggle between Microsoft Windows and MS-DOS while using the COPY command, or you will
receive a framing error. Exit Windows before using the COPY command. Re-transmit the data.
412 There is a problem with flow control between the printer and the host. Make sure the printer and the
host flow control settings match (both are DTR or both are XON/XOFF).
413 Online receive queue is full. Check your printer's XON/XOFF or DTR SETUP values to be sure there is
not a flow control problem.
414 The internal keyboard buffer is full or you need a new keyboard.
415 The buffer size you defined exceeds the total available in your machine.
420 Internal software list error.
421 Internal software list error.
422 Duplicate internal name.
424 Internal software list error.
425 Internal software list error.
426 Internal software list error.
427 Internal software list error.
428 Internal software list error.
429 A field number appears more than once in a format.
430 The format uses a graphic file that cannot be found.
433 No format field for batch data record.
497 Parallel loopback test failed.
499 Serial loopback test failed.
571 Bar code length error.
572 Copy length error.
573 Price length error
574 No CD scheme or room for CD. The CD scheme in the batch does not fit the format or the field
contains blanks.
575 The graphic included in your format could not be found.
601 Error occurred while imaging.
603 Batch not found for imaging.
611 Font, bar code or density is invalid. The font, bar code or density in the batch does not fit the format.
612 The data in this line of the batch is either missing or does not match the format.
January 2001
Confidential 9460 Service Manual
Page 31