Monarch 9460 Service Manual page 35

Error Codes
043 End column is invalid. Line segment or box end column is defined outside of printable area.
044 Dot pattern for line or box must be "" (literally just two double quotes).
Line length is defined beyond the maximum length of 3.72".
045
Line type must be S (segment) or V (vector).
046
Imaging value is defined as something other than 0.
051
101 The format referenced by the batch is not in memory.
Print quantity is outside the range 0 to 25.
102
Batch mode must be N (new) or U (update).
104
Batch separator in a batch control field must be 0 (Off).
105
Print multiple is outside the range 1 to 999.
106
107 Cut multiple is out of range.
Multiple part supply is outside the range 1 to 5.
108
109 Cut type specified is invalid.
Option number must be 1, 31, 50, 51, or 52.
200
Copy length is outside the range 0 to 255.
201
Copy start position must be 1 to 255.
202
Destination start position must be 1 to 255.
203
Source field must be 0 to 999.
204
Copy type must be 1 (copy after rules) or 2 (copy before rules).
205
Increment/Decrement selection must be I (increment) or D (decrement).
206
Incrementing start position must be 0 to 255.
207
Incrementing end position must be 0 to 255.
208
The incrementing amount must be 0 to 999.
209
Security value for a PDF417 bar code must be 0 to 8. Correct the value and resend the format to the
210
printer.
Narrow element value is less than 1 or greater than 99. Correct the value and resend the format to the
211
printer.
Wide element value is less than 1 or greater than 99. Correct the value and resend the format to the
212
printer.
Dimension must be 1 to 30 for a column or 3 to 90 for a row on a PDF417 bar code.
213
Truncation code must be S (standard) or T (truncated bar code).
214
Aspect code must be C (columns) or R (rows).
215
Option definition must be S (set) or T (template).
216
Input device must be D (Default), H (Host), K (Keyboard), N (None), or S (Scanner).
217
Pad direction must be L (from left) or R (from right).
218
Pad character is outside the range 0 to 255.
219
Check digit selection must be G to generate the check digit.
220
Primary or secondary price format is outside the range 1 to 15.
221
Data type restriction is outside the range of 1 to 6.
222
223 Option is not valid for the field.
Bar code inter-character gap must be 0 to 99 dots. (This value is also known as the additional
224
character gap when using Option 50, Defining Bar Code Densities.)
Power up mode must be 0 (online).
251
Language selection must be 0 (English) or 4 (other).
252
Batch separator code in a supply setup packet must be 0 (off).
253
January 2001
Confidential 9460 Service Manual
Page 29