Inspection And Maintenance; Daily Inspection - Matsui JL4-5V-3~6 Operation Manual

Chapter 8 Inspection and Maintenance
1.

Daily inspection

Maintenance and
inspection item
Cartridge filter within filter
case of the suction unit
Filter case
V type
Dust box
VC type
[WO-4841;JL4-V・VC-3～6-38]
This chapter describes inspection and maintenance items and the procedures
in order of inspecting frequency in order to always keep the product in a
favorable state.
1. After removing a catch clip on the filter case, remove the filter
case lid.[①→②]
2. After removing a filter clip,take out the cartridge filter from the
filter case lid to clean.[③→④→⑤]
3. Remove the fine particles that adhere to the filter with a vacuum
cleaner.
4. Be sure to recover after cleaning.
Cap
④
①
Filte
1. Install the cartridge filter so that the opening having the packing is
directed toward the filter case lid.
2. If the equipment is used in a state where packing of the cartridge filter
does not closely contact the filter case lid, the fine particles will mix into
the blower and cause blower trouble.
3. Replace with a new cartridge filter, in the case where a damaged
cartridge filter, a cartridge filter that is severely deteriorated, deformed or
is adhered with deposits cannot be removed. Replace when the blower
has trouble and cannot carry out material conveyance, the filter mesh is
clogged, or fine particles result of a damaged part.
Descriptions
Elbow pipe
②
④
⑤
③
①
CAUTION
- 38 -
Filter case lid
Filter hook
Cartridge filter
Filter clip
Catch clip
Filter case