Figure 2.7 Installation On A Wall (2); Figure 2.8 Installation On A Wall (3); Figure 2.9 Installation On A Wall (4) - Samsung OfficeServ 7100 Installation Manual

2) Make holes on the marked position of the wall-type bracket. Make the depths and the
diameters of the holes more than 35 mm and around 5.5 mm to enable to insert the
plastic anchors easily, respectively.
3) With a hammer, drive plastic anchors into the drilled holes.
4) Align the screw holes of the wall-type bracket to the position that the plastic anchors are
driven. Insert screws to each hole and tighten the screws with a philips screw driver.
© SAMSUNG Electronics Co., Ltd.

Figure 2.7 Installation on a Wall (2)

Figure 2.8 Installation on a Wall (3)

Figure 2.9 Installation on a Wall (4)

OfficeServ 7100 Installation Manual
2-5