Samsung OfficeServ 7100 Installation Manual page 13

OfficeServ 7100 Installation Manual
Un-allowed Use of Selector Switch
The OfficeServ 7100 system only use 230 V. Do not change the input power
freely by means of the selector switch.
AC Power Connection Inhibited
Do not operate other devices with the AC power of the OfficeServ 7100 system or
with the DC power of external batteries.
Check of Power-off
Check if the cabinet power is off when mounting boards on slots. Inserting or
ejecting a board while the power is on may damage the board.
Board Reset
New settings are applied only after the board is reset. The system may
malfunction if the board is not properly initialized.
Caution for Installation
Only a trained service staff can install the OfficeServ 7100 system.
© SAMSUNG Electronics Co., Ltd.
IX