CHAPTER 3. Ошибка! Стиль не определен.
Following boards are mounted on the slots according to the configuration of the OfficeServ
7100.
Cabinet
Control Part
Subscriber
Part
(UNI)
The descriptions about each part on the rear of the cabinet are listed in the table below.
Power Switch
Power I/O Switch
AC LED
DC LED
Battery Socket
Ground Lug
3-2
Table 3.1 Mountable Boards on Slots
Slot
Slot 0
MP10, MP11
Slot 1 and Slot 2
- OS 7100 Card: UNI board
- OS 7200 Card: 8/16DLI2, 8/16SLI2, 8COMBO, 8TRK,
TEPRI, LIM, MGI,
- OS7400 Card: TEPRI2, MGI64
Table 3.2 Parts on the Rear Panel of the Cabinet
Part
Power on/off the OfficeServ 7100 system.
Connector for the power cable connection
The LED indicates the input of AC power.
The LED indicates the normal output of DC power.
Socket to connect an external battery
Lug for the ground of the system communication
Mountable Board
Function
© SAMSUNG Electronics Co., Ltd.