Figure 3.3 Mounting A Modem Board On The Mp10/11 Board; Figure 3.4 Mounting 4Swm/4Dlm On The Mp10/11 Board - Samsung OfficeServ 7100 Installation Manual

CHAPTER 3. Ошибка! Стиль не определен.
2) A modem board is mounted to connector P7/P8 of the MP10/11 board.
When mounting a modem board, the holes on the corners of the modem should be
aligned fitting with the spacer.
4SWM or 4DLM can be mounted to connector P11, P12 and P13 of the MP10/11
board. Screws are basically locked to the support beside P13. Unscrew and position the
screws to the connector direction of 4SWM/4DLM before mounting 4SWM/4DLM.
After that, tighten the screws fitting with the grooves of 4SWM/4DLM.
3-4

Figure 3.3 Mounting a Modem Board on the MP10/11 Board

4SWM

Figure 3.4 Mounting 4SWM/4DLM on the MP10/11 Board

MODEM
© SAMSUNG Electronics Co., Ltd.