The Pin Screen; The Plmn Screen - ZyXEL Communications WAH7608 User Manual

8.5 The PIN Screen

Use this screen to enable PIN code authentication. Click Configuration > Network > PIN. The screen
appears as shown next.
Figure 27 Configuration > Network > PIN
A PIN (Personal Identification Number) code is a 4-digit key (0000 for example) to a SIM card.
Select Enable to enter the PIN code every time the WAH7608 reboots. To turn PIN code authentication
enter the PIN code and click Disable.

8.6 The PLMN Screen

This screen allows you to view available Public Land Mobile Networks (PLMNs) and select your preferred
network when the WAH7608 is outside the geographical coverage area of the network to which you are
registered and roaming is enabled.
Click Configuration > Network > PLMN. The screen appears as shown next.
Figure 28 Configuration > Network > PLMN
The following table describes the labels in this screen.
Table 13 Configuration > Network > PLMN
LABEL
Mode
Status
Chapter 8 Network
DESCRIPTION
Select Automatic to have the WAH7608 automatically connect to the first available
mobile network using roaming when it is outside the coverage area of the original
service provider's network.
Select Manual to display the network list and manually select a preferred network.
This displays Current displays the PLMN to which your WAH7608 is currently
connected.
This displays Available displays other PLMNs available by your ISP. Go to the screen
to connect to another available PLMN.
This displays Forbidden displays PLMNs available by other ISPs. To connect to one of
these networks you need a working SIM card of the ISP shown in
WAH7608 User's Guide
66