The Ipv4/Ipv6 Firewall Entries - ZyXEL Communications WAH7608 User Manual

Figure 43 Configuration > Security > Firewall > Configure l
The following table describes the labels in this screen.
Table 22 Configuration > Security > Firewall > Configure
LABEL
Firewall Enable
Packets Allowed
Apply

10.3 The IPv4/IPv6 Firewall Entries

The WAH7608 firewall is a packet filtering firewall and restricts access based on the source/destination
device network address of a packet and the type of application. Use this screen to configure IP filtering
rules. To access these screens, click Configuration > Firewall > IPv4 Firewall Entries or Configuration >
Firewall > IPv6 Firewall Entries.
Figure 44 Configuration > Security > Firewall > IPv4 Firewall Entries
Chapter 10 Firewall
DESCRIPTION
Select this check box to activate the firewall. The WAH7608 performs access control and
protects against Denial of Service (DoS) attacks when the firewall is activated.
Select Accept to allow access to the firewall rule in the list and block access to the ones that
don't match.
Select Drop to block access to the firewall rule in the list and allow access to the ones that
don't match.
Click Apply to save the settings.
WAH7608 User's Guide
79